10in Jaw Crushers have a maximum feed size of 8in (203mm) and final output size can be regulated from ¼ to 3in (6 to 76mm) through clearance adjustment of the jaw plates. Throughput is approximately 1 to 2 tons (900 to 1,800kg) per hour. Jaw sizes are 10 x 6in (254 x 152mm) WxD and are made from 3/4in (19mm) material hard-faced with abrasion resistant steel. Facing material has Brinell hardness of 450. Special abrasion-resistant Cast Manganese/Chrome jaw plates are also available for longer life or for processing of especially hard and tough materials.
Available power options are 20hp Gasoline or 18hp Diesel engines, or a 10hp Electric Motor.
The main shaft is 2.4in (61mm) at the cam shaft and 2in (51mm) at the drive shaft. The efficient electric motor is supplied ready for wiring to a number of common three-phase voltage configurations from 208 to 460 volt.
Grinding Elements 10 x 6in Jaws
Particle Topsize 203mm
Final Size 6 to 76mm
Max. Feed Capacity 1 to 2 tons (900 to 1,800kg) per hour
Electrical 20hp / 3-Phase
Product Dimensions 56 x 32 x 48in (1422 x 812 x 1220mm), WxDxH
Estimated Shipping Weight 1050.0lbs (476.28kg)