AgraTronix 7156 HT-PRO Moisture Tester Calibration Clip

AgraTronix Moisture Tester Parts & Accessories

Calibration clip for HT-PRO Probe-Style Hay Moisture Testers (07120–20” Probe | 07121–10” Probe)

CALIBRATION CHECK (RE-CALIBRATION)

1. Clean the probe tip. While holding the probe in the air, press and hold the 4 button. The tester will begin to count down on the display “5,4,3,2,1” and the tester will then display “00.0”.
2. Release the 4 button.
3. Firmly place the calibration clip on to the probe tip and then press and hold the 4 button.
4. The tester will now display 24.8%, indicating that the unit is now calibrated.

**If the tester displays “99.9” anytime during the calibration process, this indicates an error has occurred. Try repeating the calibration procedure starting at Step 1.

Downloads

• HT-Pro Product Manual (PDF)