Rebar Protective Cover Adapter System for 2ft x 4ft (25/Ct)
- Designed to cover in-line exposed rebar.
- Only requires two units for every 8 feet of coverage (2 units per 4 feet in California) . The Cover Cap holds two 2x4's or 2x6's suspended above a line of rebar, eliminating the need to cap each rebar.
- Cap can aslo be used on a single rebar to provide protection.
- Purchase separately or as a system with Disc-10 or HH-M.
- Deslauriers' Caps are steel reinforced and conform to State and Federal safety regulations.
Deslauriers’ PROTECTIVE COVER ADAPTER (PCA) is designed to snap on DISC-10, DISC-10F or HH-M protective covers and create a saddle into which double 2x4’s are secured to create a system to protect a row of in-line rebars (for Rebar #3-#11).
Deslauriers’ PROTECTIVE COVER ADAPTER LARGE (PCA-L) is designed to snap on DISC-10, DISC-10F or HH-M protective covers and create a saddle into which double 2x6’s are secured to create a system to protect a row of in-line rebars (for Rebar #3-#12).
- Approved by California OSHA #C1718AG and OSHA #1722AG.
- Complies with Federal OSHA 701 (b).
- Federal OSHA has ruled that if cover is in compliance with Cal OSHA, then it conforms to Fed. 701 (b).
