TR-734 DGSI F.A.P. Plus 3/8-inch ID Buna-N® hose (Discharge) 50ft | DGSI Slope Indicator Environmental Products
Above-ground fluid discharge or air supply, or downwell fluid discharge - maximum pressure 250 psi
- Hoses and Tubing (TR-732 / 734 / 735) for the F.A.P. Plus are available in various sizes and sold per foot (50ft base length).
- The standard hose size from the outlet side of the filter regulator to the F.A.P. Plus™ pump is a 1⁄4” Push-Lok™ fitting and a 3/8 in barb fitting on the air inlet side.
- The standard F.A.P. Plus™ fluid discharge line has a 3/8 in barb fitting.
- The hose sizes may have to be increased depending on the distance between the system components.
- DGSI supplies an extensive range of tubing and hose for use with remediation, ground water sampling and well development pumps.
- Tubing and hose are used for the fluid discharge and air supply lines.
- It is very important to insure chemical compatibility with the fluids that will be pumped.
- When distinguishing between tubing and hose, it is important to note the following: When selecting tubing or hose, it is important to accommodate for the friction losses that will occur based on the lengths being used.
Part | Size | Composite | Use
- TR-732 | 1/2in ID | Buna-N Optional above-ground air supply
- TR-734 | 3/8in ID | Buna-N Above-ground fluid discharge or air supply, or downwell fluid discharge
- TR-735 | 1/4in OD | Polyethylene Downwell supply to pump
F.A.P. Plus™ Pump System
The F.A.P. Plus™ Pump system is comprised of seven main components:
- F.A.P. Plus™ Pump (1*)
- Skimmer Assembly (2*)
- Well Clincher (3*)
- Filter/Regulator (5*)
- Pneumatic Overfill Protection Device (4*)
- Electric Air Compressor (not shown*)
- Hoses (not shown*)
* refer to product photo for reference
Options:
- Solar NAPL Compressor
- F.A.P. HF