POD (Pump on Demand) Skimming System | DGSI Slope Indicator Passive Remediation
Includes pump, skimmer, spanners and cycle counter
Applications
- POD Skimmer system model TR-610 recovers light-end hydrocarbons with SSU values of 80 or lower.
- POD Skimmer system model TR-611 is used for 4-in and larger diameter wells and is perfect for recovering products with viscosities of 80 SSU or higher.
POD System
(refer photo diagram)
- Pump exhaust | 3/16 in clear Nylon 1
- Gas supply, reducing union | 5/32 in O.D. x 1/4 in O.D.
- Product discharge reducing union | 1/4 in O.D. x 3/8 in I.D.
- Eye bolts to suspend skimmer in well.
- Well centralizer | 3½ in O.D.
- Well centralizer | 1in O.D.
- Product density float | 3½ in O.D.
- Product bypass | float 1½ in O.D.
- Hydrophobic filter element | 1½ in O.D.
- Density float | 1½ in O.D.
- Coiled product tubing
- Spacer
- POD Pump | 1¾ in O.D.
Specifications
TR-610 POD Skimming System (Includes pump, skimmer, spanners and cycle counter)
- Assembled length (pump / skimmer) (in): 97
- Assembled weight (lb): 8
- Well centralizer diameter (in): 1-7/8
TR-611 POD High Viscosity Skimming System (Includes pump, skimmer, spanners and cycle counter)
- Assembled length (pump / skimmer) (in): 97
- Assembled weight (lb): 8
- Well centralizer diameter (in): 3-1/2
Description
Out-of-the-box LNAPL recovery in 2-inch and larger-diameter wells. For remediation sites with power limitations or where immediate response is needed, the POD Skimmer is an excellent choice. It’s based on our highly successful FAP™ Plus Skimming System and incorporates many of the same proven elements. The POD Skimmer ships partially assembled and can be fully operational using either CO2 or solar power within minutes. This reduces the need for permits and trenching and saves money and time. When using CO2 as a power source, the POD Skimmer takes up very little space, making it an excellent choice for locations where a smaller foot-print is needed
Advantages
- The POD Skimmer is a green energy LNAPL recovery system that can be powered by solar, CO2, or compressed air.
- Cycles only when the pump is full, minimizing air consumption.
- No need for electrical power when operated with CO2 or solar.
- Records the amount of product recovered from each well.
- Can be installed and operational in less than 30 minutes.
Pump Accessories
- Flow Valve
- Nylon Bundled Tubing
- Standard Hose Assembly
- Well Seals
- Pulse Counter
- Filter / Regulator