Forney LA-0316 Concrete Air Meter Kit / Press-Aire Meter Kit
This unit measures the air content in fresh compacted concrete. It consists of 2 main parts: the base (measuring chamber) and the cover assembly. It is supplied complete with calibration set.
The FORNEY Concrete Air Meter Kit / Press-Aire Meter Kit is the industry’s most popular kit for testing entrained air. Whether going into the Ready-Mix truck or coming down the chute, it gives fast results. Always accurate. The kit contains everything needed to perform the test and — most importantly — to keep the unit in calibration.
The cast aluminum base, of cylindrical shape, has machine-flanged rims. The interior surfaces of the base and surfaces of rims, flanges and other component-fitted parts are machined, and these tapered, smooth surfaces facilitate frequent water clean-up. The unit is especially designed for easy disassembly to replace worn or damaged parts in the field.
The cover assembly incorporates a pressure gauge, air release lever, air bleeder valve, air pump and valves and petcocks used to perform both tests and calibrations according to ASTM C231.
To seal the cover to the base, there are 4 rugged stainless-steel clamps with quick locking action. The unit is unaffected by changes in barometric pressure. These clamps are resistant to corrosion from concrete, and they are easier to use and significantly less expensive to replace than older design clamps.
The new high-volume Super Pump requires fewer strokes to attain the test pressures. The check valve eliminates older design O-ring seal problems. The brass petcocks have ball valves for easy, durable operation.
The large 4-inch diameter sealed gauge with adjustable pointer and stainless-steel case is durable and easy to read and calibrate.
The unit conforms to ASTM C231, Meter Type B, and uses the principle of Boyle’s Law. The base has a capacity of 1/4 cubic feet. It can also be used for unit weight, volume, and bulk density determinations in field conditions. ASTM C-231 requires a capacity at least 0.20 ft3 (0.006 m3).
KIT CONTAINS:
- Syringe
- Tamping Rod
- Strike Off Bar
- Calibration Vessel
- Calibration Tube, inside
- Calibration Tube, outside
- Carrying Case
- Parts List
- Instructions
Replacement parts are also available.
Browse Certified MTP for all of your concrete test equipment needs like concrete air entrainment meters.
Meets Test Methods:
AASHTO T152
ASTM C 231
View our full line of Concrete Air Entrainment Meters and Parts
Accessories to Concrete Air Entrainment Test:
Tamping Rods for Slump Cone Test have hemispherical tips and are for use when consolidating concrete specimens in required tests that include slump, air content, and strength
Concrete Strike-Off Bar is used to remove excess material
Replacement Gauges in Concrete Air Meter Parts are quality, dependable gauges that fit most Type B Concrete Air Meters
Replacement Air Pump fits Gilson Concrete Air Meters (and those from other manufacturers) with solid construction that offers a longer service life. For a list of more replacement parts, view our concrete air meter replacement parts page.
Related Blogs to Concrete Air Entrainment Test:
Air and Concrete: How Much Should They Mix?
Consistency of Concrete; How It's Measured, Why It's Important, and Relation to Workability
The Proper Pressure with Certified Concrete Testing Products
Materials Testing Experts Explain The Importance Of Concrete Testing
How to Perform a Concrete Air Test
Roller Meter Tips: Maximize Concrete Air Content Accuracy
Volumetric Air Meter: How to Accurately Measure Air Content
Understanding Concrete Air Test: Essentials and Procedures
Air Entrainment: Achieving Optimal Concrete Quality
Concrete Air Content Pressure Test
All About Gaskets: A Comprehensive Guide
The Forney LA-0316 Concrete Air Meter Kit/Press-Aire Meter Kit is a highly reliable and accurate tool for measuring the air content in fresh compacted concrete. This kit is widely used in the industry and is known for its fast and precise results.
The kit includes two main parts: the base, also known as the measuring chamber, and the cover assembly. These parts are made of cast aluminum with machine-flanged rims, ensuring durability and easy clean-up. The base has a capacity of 1/4 cubic feet, making it suitable for various testing purposes.
The cover assembly is equipped with essential components such as a pressure gauge, air release lever, air bleeder valve, air pump, and valves. These components allow for performing both tests and calibrations according to ASTM C231 standards.
To ensure a tight seal, the kit is equipped with four rugged stainless-steel clamps with quick locking action. These clamps are highly resistant to corrosion from concrete and are easy to use. Unlike older design clamps, they are more cost-effective to replace.
The Forney LA-0316 Concrete Air Meter Kit/Press-Aire Meter Kit comes complete with a syringe, tamping rod, strike-off bar, calibration vessel, calibration tubes, carrying case, parts list, and instructions. The kit also includes a calibration set, which is crucial for maintaining the unit's accuracy.
This kit is compatible with ASTM C231 standards, Meter Type B, and operates based on Boyle's Law principle. It is unaffected by changes in barometric pressure, ensuring consistent and reliable results.
In addition to the Concrete Air Meter Kit, Forney offers a wide range of accessories for concrete air entrainment tests. These include tamping rods, strike-off bars, replacement gauges, and air pumps to meet all your testing needs.
Forney is a leading provider of concrete testing equipment and is committed to delivering high-quality and reliable products.
Browse Certified MTP for all your concrete testing equipment needs, including concrete air entrainment meters and accessories. You can find the complete product manual and parts list on our website to assist you with any troubleshooting or maintenance requirements.
Ensure accurate and reliable concrete testing with the Forney LA-0316 Concrete Air Meter Kit/Press-Aire Meter Kit.
