Heater/Circulator for Curing Tanks
Heater/Circulator provides highly accurate temperature control to ±0.09°F (±0.05°C) for fluid tanks and baths up to 7.4gal (28L) from ambient + 9° to 302°F (ambient + 5° to 150°C).
Heating capacity also easily controls temperatures for most larger concrete curing tanks to specified levels. Temperature range and stability for large tanks are dependent upon tank volume, surface area, and ambient temperatures.
The Heater/Circlator features a LED display PID controller that is switchable between °C or °F, adjustable overtemperature protection, and low-liquid level cut-off. A two-speed circulator switches from 2.4 to 4gpm per minute (9 to 15L) to adapt to a wide range of tank sizes and types. All contact parts are stainless steel. The 1,100 Watt, 7.5in (191mm) long coiled heating element requires only 3in (76mm) immersion, ideal for shallower tanks.1/2in ID tubing can be attached to the adjustable flow director for external circulation.
The Circulator clamps to tank walls up to 1.2in (30.5mm) thick. Two-year manufacturer’s warranty. Supplied with a 6ft power cord with a grounded plug.
For curing concrete samples in the field, we recommend the Concrete Curing Box (165qt. Heat/AC)
Features:
- 7.4gal flow rate
- Stainless steel contact parts
- Adjustable overtemperature protection
- Low-liquid level cut-off
- Accurate temperature control
- Long heating element
Meets Test Methods:
AASHTO M 201
AASHTO T 23
ASTM C 192
ASTM C 511
View the full line of Concrete Beam Molds and Beam Testers and our full line of concrete curing equipment and products for ASTM C192/192M Standards for Cement Tests. Our most popular model for curing is the Concrete Curing Box (165qt. Heat Only)