The Lab Companion AAHB2001K DLH-01G 230V Ductless Fume Hood, 60Hz is a high-quality and efficient solution for your laboratory needs. Whether you are conducting experiments or working with chemicals, this fume hood provides a safe and convenient workspace.
One of the standout features of this fume hood is its performance. It comes with a variety of filters and work surfaces that can be customized to suit your specific experimental requirements. The polyester fiber pre-filter effectively traps larger particles, increasing the lifespan of the main HEPA filter. The large-capacity blower ensures sufficient intake flow rate while keeping noise levels below 55 dB during normal operation. Additionally, the fluorescent light is installed outside the workspace, preventing airflow hindrance and contamination while providing ample illumination.
The Lab Companion AAHB2001K DLH-01G offers not only performance but also convenience. The built-in anemometer allows for easy monitoring of the internal airflow speed. The cartridge type filters can be conveniently accessed from the front for easy replacement. The hood also features a built-in utility hole, allowing for easy routing of cords or wires of the equipment placed inside. The fully or half openable front door enables convenient transport of experimental apparatus and equipment into or out of the workspace.
When it comes to safety, the Lab Companion AAHB2001K DLH-01G meets the highest industry standards. It complies with BS 7989:2001 for activated carbon filter efficiency and capacity, as well as BS 7258-1:1994 for structure, electrical outlet, lighting, and sound level. It also adheres to ANSI/ASHRAE 110-1995 and NF EN 14175-1 standards for local smoke, large volume visualization, face velocity, and tracer gas.
The fume hood is equipped with a user-friendly microprocessor control system. The face velocity can be set at an initial set point of 0.4m/s or 80fpm. The air flow meter is of the swing vane type, ensuring accurate measurements. The main filter is a chemical filter, with an option to choose from six different filters. The main body and window are made from 2.0mm steel with an epoxy powder-coated finish, while the work surface comes in six different options. The fluorescent light intensity is greater than 600 lux, providing ample lighting for your workspace.
In terms of dimensions, the interior measures 880x640x800mm (WxDxH), while the exterior without stand measures 900x660x1250mm (WxDxH). With the stand, the exterior dimensions are 900x660x1985mm (WxDxH). The net weight of the body is 100kg (220.5lbs), and with the stand, it is 120kg (264.6lbs). The electrical requirements are 230V, 60Hz, and 0.7A.
With its excellent performance, convenience, and safety features, the Lab Companion AAHB2001K DLH-01G 230V Ductless Fume Hood, 60Hz is an ideal choice for any laboratory setting.
One of the standout features of this fume hood is its performance. It comes with a variety of filters and work surfaces that can be customized to suit your specific experimental requirements. The polyester fiber pre-filter effectively traps larger particles, increasing the lifespan of the main HEPA filter. The large-capacity blower ensures sufficient intake flow rate while keeping noise levels below 55 dB during normal operation. Additionally, the fluorescent light is installed outside the workspace, preventing airflow hindrance and contamination while providing ample illumination.
The Lab Companion AAHB2001K DLH-01G offers not only performance but also convenience. The built-in anemometer allows for easy monitoring of the internal airflow speed. The cartridge type filters can be conveniently accessed from the front for easy replacement. The hood also features a built-in utility hole, allowing for easy routing of cords or wires of the equipment placed inside. The fully or half openable front door enables convenient transport of experimental apparatus and equipment into or out of the workspace.
When it comes to safety, the Lab Companion AAHB2001K DLH-01G meets the highest industry standards. It complies with BS 7989:2001 for activated carbon filter efficiency and capacity, as well as BS 7258-1:1994 for structure, electrical outlet, lighting, and sound level. It also adheres to ANSI/ASHRAE 110-1995 and NF EN 14175-1 standards for local smoke, large volume visualization, face velocity, and tracer gas.
The fume hood is equipped with a user-friendly microprocessor control system. The face velocity can be set at an initial set point of 0.4m/s or 80fpm. The air flow meter is of the swing vane type, ensuring accurate measurements. The main filter is a chemical filter, with an option to choose from six different filters. The main body and window are made from 2.0mm steel with an epoxy powder-coated finish, while the work surface comes in six different options. The fluorescent light intensity is greater than 600 lux, providing ample lighting for your workspace.
In terms of dimensions, the interior measures 880x640x800mm (WxDxH), while the exterior without stand measures 900x660x1250mm (WxDxH). With the stand, the exterior dimensions are 900x660x1985mm (WxDxH). The net weight of the body is 100kg (220.5lbs), and with the stand, it is 120kg (264.6lbs). The electrical requirements are 230V, 60Hz, and 0.7A.
With its excellent performance, convenience, and safety features, the Lab Companion AAHB2001K DLH-01G 230V Ductless Fume Hood, 60Hz is an ideal choice for any laboratory setting.