The Lab Companion AAHB2012K DLH-11G 230V Ductless Fume Hood, 50Hz is the ideal solution for maintaining a clean and safe working environment in your laboratory. With its high-performance features and convenient design, this fume hood is perfect for a range of experimental needs.
Equipped with a variety of filters and work surfaces, this fume hood allows you to customize your setup to suit your specific requirements. The high-quality polyester fiber pre-filter effectively traps larger particles, extending the life of the main HEPA filter. The large-capacity blower ensures a sufficient intake flow rate while minimizing noise levels to less than 55 dB during normal operation.
An external fluorescent light illuminates the workspace without hindering the airflow or causing contamination, ensuring optimal visibility throughout your experiments. The built-in anemometer allows for easy monitoring of the internal airflow speed, providing you with precise control and a safe working environment.
For added convenience, the front access to cartridge-type filters allows for easy replacement, reducing downtime and increasing efficiency. The built-in utility hole enables the easy routing of cords or wires for equipment placed inside the hood, improving organization and reducing clutter. Additionally, the fully or half openable front door allows for convenient transport of experimental apparatuses and equipment in and out of the workspace.
When it comes to safety, the Lab Companion AAHB2012K DLH-11G meets international standards for efficiency and structure. The activated carbon filters have been tested in accordance with BS 7989:2001, while the structure, electrical outlet, lighting, and sound levels conform to BS 7258-1:1994. Furthermore, the hood meets the requirements for local smoke, large volume visualization, face velocity, and tracer gas according to ANSI/ASHRAE 110-1995 and NF EN 14175-1.
This fume hood features a microprocessor control system, ensuring precise and reliable operation. The face velocity of the airflow is set at an initial point of 0.4m/s or 80fpm, and the swing vane type air flow meter provides accurate readings. The main filter is complemented by an optional selection of six different chemical filters to suit your specific research needs.
With its durable construction, including a 2.0mm epoxy powder-coated steel body and 8mm/6mm thick acrylic resin window, this fume hood is built to withstand the demands of a laboratory environment. The optional work surfaces offer versatility, and the fluorescent light provides an intensity of over 600lux.
The Lab Companion AAHB2012K DLH-11G 230V Ductless Fume Hood, 50Hz is designed with the utmost care and attention to detail, ensuring safety, convenience, and efficiency for your laboratory experiments. With its comprehensive features and high-quality construction, this fume hood is the perfect addition to any modern laboratory.
Equipped with a variety of filters and work surfaces, this fume hood allows you to customize your setup to suit your specific requirements. The high-quality polyester fiber pre-filter effectively traps larger particles, extending the life of the main HEPA filter. The large-capacity blower ensures a sufficient intake flow rate while minimizing noise levels to less than 55 dB during normal operation.
An external fluorescent light illuminates the workspace without hindering the airflow or causing contamination, ensuring optimal visibility throughout your experiments. The built-in anemometer allows for easy monitoring of the internal airflow speed, providing you with precise control and a safe working environment.
For added convenience, the front access to cartridge-type filters allows for easy replacement, reducing downtime and increasing efficiency. The built-in utility hole enables the easy routing of cords or wires for equipment placed inside the hood, improving organization and reducing clutter. Additionally, the fully or half openable front door allows for convenient transport of experimental apparatuses and equipment in and out of the workspace.
When it comes to safety, the Lab Companion AAHB2012K DLH-11G meets international standards for efficiency and structure. The activated carbon filters have been tested in accordance with BS 7989:2001, while the structure, electrical outlet, lighting, and sound levels conform to BS 7258-1:1994. Furthermore, the hood meets the requirements for local smoke, large volume visualization, face velocity, and tracer gas according to ANSI/ASHRAE 110-1995 and NF EN 14175-1.
This fume hood features a microprocessor control system, ensuring precise and reliable operation. The face velocity of the airflow is set at an initial point of 0.4m/s or 80fpm, and the swing vane type air flow meter provides accurate readings. The main filter is complemented by an optional selection of six different chemical filters to suit your specific research needs.
With its durable construction, including a 2.0mm epoxy powder-coated steel body and 8mm/6mm thick acrylic resin window, this fume hood is built to withstand the demands of a laboratory environment. The optional work surfaces offer versatility, and the fluorescent light provides an intensity of over 600lux.
The Lab Companion AAHB2012K DLH-11G 230V Ductless Fume Hood, 50Hz is designed with the utmost care and attention to detail, ensuring safety, convenience, and efficiency for your laboratory experiments. With its comprehensive features and high-quality construction, this fume hood is the perfect addition to any modern laboratory.