The CW3-10P Heating Bath Circulator (10L) has external and internal circulation with powerful pumping capability. This Model is specially designed for precise temperature control of external instruments or for immersion purposes using a powerful pump and an intelligent program control.
Intelligent Program Control
- 10 programs available for temperature ramp up and dwell control. 10 steps per a program and 99 hours 59 minutes per a step.
- Stored programs are easily linkable.
- Programs can be repeated up to 99 cycles.
- Pre-heating and heating time are settable before program starts.
Performance
- Temperature range from ambient +5 to 150
- Microprocessor PID control
- Three point temperature calibration / Automatic tuning / Automatic run
- Accurate, stable, and efficient temperature management by using a powerful variable-speed pump. (1 to 3 steps of pump for internal circulation and 4 to 5 steps for external circulation)
- Powerful pump pressure and flow rate throughout the whole temperature range.
Convenience
- Intuitive touch screen LCD controller with easy icons and logical menus.
- Dual wait on/off timer modes. (1 min. to 99 hr. 59 min.)
- Digital input and output control function for interlocking external devices.
- Corrosion-resistant, leak-proof, round-cornered, and easy-to-clean stainless steel bath with front access drain valve.
- RS-232 interface for external control and data collection. (RS-232 to USB serial converter is provided.)
- Built-in casters and side handles for easy transport and installation.
Safety
- Isolated design of agitator, heater, and sensor by a ba e plate to minimize the turbulence in the bath fluid and also to protect users and samples against direct contact
- Complete safety protection system with warning alarms. Low fluid level and dry-running, over-temperature, over-current.
- Keypad lock function prevents accidental changes during operation.
- Splash-proof keypad
Specifications
- Bath Volume (L / cu ft): 10 / 0.4
- Working Temperature Range (C / F): Amb. +5 to 150 / Amb. +9 to 302
- Temperature Stability (±C / F): 0.05 / 0.09
- Pump
- Max. Pressure, Max. Flow Rate: 5.9 PSI (406.8 millibar), 7.4 gallons / minute (28 liters / minute)
- Dimension
- Bath Opening / Depth (W×L, D) (mm / inch): 211×154, 180 / 8.3×6.1, 7.1
- Overall (W×L×H) (mm / inch): 281×450×444 / 11.1×17.7×17.5
- Net Weight (kg / lbs): 15 / 33
- Electrical Requirements: 120V, 60 Hz, 8.6A
View the full line of Lab Water Baths And Heating Circulators, Griffin Glass Lab Beakers, Volumetric Flasks, Erlenmeyer Flasks, Filter Flasks, Glass Beakers, and Flasks, Beakers, Pipettes, & Graduated Cylinders and beaker tongs as well as Tile Tub Water Heater, 12in
Related Blogs for Heating Baths:
Understanding Air Condenser Chemistry in 2023
Chemistry Glassware Names: A Comprehensive Guide
Suction Filtration: The Basics of Vacuum Filtration
What is a Graduated Cylinder Used For?
Most Accurate Glassware for Measuring Volume
All About Volumetric Flask: Uses, Function & Overview
Aspirator Flask: Benefits of Borosilicate Glass Filter Flask
Comprehensive List of Biology Laboratory Equipment in 2023
Everything You Need to Know About Beakers in Chemistry
Pipette or Measuring Cylinder: Tools for Liquid Measurements
Measuring the Volume of Liquid: Tips, Tools, and Techniques
Unlock the Secrets of Flask Volume for Accurate Results
Efficiency with the Erlenmeyer Flask: Tips for Lab Use
Guide to Bunsen Burners: Types, Uses, and Safety Tips
Lab Burner: Safe and Efficient Heating in the Laboratory