Lignomat D-1 mini-Ligno DX/C Moisture Meter
Mini-Ligno moisture meters are made easy to use and sturdy. They give accurate and reliable measurements due to Lignomat’s advanced measuring technology. The unique LED display is virtually unbreakable and bright enough to read even in poorly lit areas.
Whether you are a woodworker, floor installer, inspector or restoration specialist, if accuracy and versatility is important to you, the digital moisture meter mini-Ligno DX/C will provide both.
The digital moisture meter comes with 42 settings to correct for:
– domestic and tropical wood species
– horizontal, vertical and strand bamboo
– laminates and panel products
– gypsum and drywall (*same as mini-Ligno S/D and mini-Ligno S/DC)
– reference scale for concrete and other building materials.*
Review packages for DX/C to choose the electrode, that best suits your needs. Pins are available to measure up to 7″ deep. Pin meters work for all thicknesses of wood from veneer to logs. Any shape round or oval can be measured as long as both pins fit in the same piece. Versatility is one of the advantages over pinless meters.
| Measuring Range | 5-65% dependent upon species setting* |
| Display | Bright LED display with 0.1% resolution below 10% and 1% steps above 10%. Most durable display with a lifetime warranty. |
| Species Corrections | 42 settings to correct for – domestic and tropical wood species – bamboos, vertical, horizontal and strand – laminates and wood-based panel products – 1 Scale for gypsum and drywall products (%) – 1 Reference scale for building materials for easy – identification of moisture levels in Search – and Compare Mode |
| Gypsum Scale | 0-7.5% |
| Reference Scale | 0-99 for non-wood building materials |
| Calibration | Stable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary. All mini-Lignos are calibrated for a wood temperature of 70°F (20°F). A correction table for other wood temperatures is listed in the manual. |
| Calibration Check | External Calibration check block#TP is available to verify the calibration and functions of meter, cable and electrode. |
| Included | 2 pair of pins, measuring depth of 3/16″ and 7/16″ (5,10mm). Wrist strap and pouch, one 9V battery, manual and laminated wood group chart. |
| Connector | mini-Ligno DX can only be used with built-in pins mini-Ligno DX/C has built-in pins and connection for external probe |
| Size | Pocket-size 2 3/4″x 5″x1″ (70x140x25mm) |
| Weight | 8 ounces (200g), made out of high-impact plastic |
| Warranty | mini-Lignos have a 2 year warranty. Display has a life-time warranty. Accessories have a 1 year warranty. Pins and battery are excluded. |
The DX/C is one of our most popular meters with the following features:
– a unique shape that fits comfortably in your hand when
– measuring
– a measuring range low enough to check hardwood floors (5%*)
– a measuring range high enough to evaluate wet lumber (65*)
– a bright, digital display readable even in dark crawl spaces
– resolution of 0.1% below the critical range of 10%
– 40 settings for wood species corrections including a chart
– for domestic and tropical wood species including bamboo
– a reference scale 0-99 for non-wood building materials such
– as drywall, plaster and other “soft” building materials. For
– instance, to pinpoint problems around windows or showers,
– in leaky ceilings, after water lines broke or buildings were flooded.
– connection for external cables and electrode — to evaluate
– concrete or reach hidden areas for moisture testing, even
– behind 7″ of insulation.
The functionally designed mini-Ligno DX/C fits in your hand when measuring and is small enough to carry in a shirt-pocket. The green cap covers the pins during transportation and serves as a handle when pushing the pins into the wood. This unique design allows pushing behind the entire meter to insert the tapered pins easily. Longer pins are stored inside the meter for measuring thicker material. The short pins are ideal for surface or end cut readings and for veneer.
For measurements, push the pins into wood. The unique on-off switch between the pins, turns meter on automatically and bright LED lights instantly indicate moisture percentage.
An easy-to-use, reliable instrument.
| Product Documentation Links | |||
| – User Instructions for mini-Ligno DX/C – Woodgroup Card mini-Ligno DX – Specifications and Features of mini-Ligno DX/C |
View the full line of Soil Testing Products and Soil Moisture Testing Equipment, especially the popular Aggregate/Sand Moisture Measurement System
