Lignomat Ligno-Scanner SDM Moisture Meter
Why choose a Scanner from Lignomat: Lignomat’s unique measuring technology assures calibration accuracy, reliability and repeatability backed by a 2-year warranty on all moisture meters. The Ligno-Scanner SDM pinless moisture meter has very unique features such as calibrations to measure the moisture in bamboo.
The Ligno-Scanner SDM clearly outperforms most pinless moisture meters on the market today. The meter has 2 independent sets of calibrations one for measuring 1/4″ deep and one for measuring 3/4″ deep. Dual-depth settings are available for different wood species, drywall, reference scales for concrete and other building materials. The bamboo calibration settings (flat and vertical grain and strand, carbonized) are for a measuring depth of 1/4″.
The moisture meter of choice for multi-material applications:
flooring, restoration, inspection and construction.
Dual-depth – a new approach to scanning – works well for:
– Different boards thicknesses, over 3/4″ and less than 3/4″ thick.
– Measuring layered engineered panels.
– Comparing surface / core moisture to see if boards are dried evenly.
– Floor testing at 1/4″ depth assures only the floor planks are
– measured and not the concrete or subfloor underneath.
– Checking surface moisture after water damage or after applying
– waterborne finishes.
Measuring Range | 5-60% dependent upon species setting* |
Display | 0.1% resolution for the entire range. |
Species Corrections | 71 wood group settings, or use the specific gravity of the wood between 0.3 and 1.0 (setting 30-100).Bamboo settings for horizontal, vertical and strand bamboo. |
Gypsum Scale | 0-2% |
Reference Scale | 0-99 for non-wood building materials3 Reference scales with different sensitivity levels from soft to hard building materials |
Calibration | Stable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary. |
Calibration Check | External calibration check block #TS is available to verify the calibration and functions of meter. |
Included | Pouch, one 9V battery, manual and laminated wood group chart. |
Size | Pocket-size 2″ x 5.5″x0.5″, Measuring pad 1 5/8″ x 2 5/8″ |
Weight | 8 ounces (200g), made out of high-impact plastic |
Warranty | All moisture meters have a 2 year warranty. Pins and battery are excluded. |
The measuring depth of a pinless meter is crucial. Moisture readings are too low, when the Scanner is placed on a work piece which is thinner than the measuring depth. Scanners never measure any deeper than the measuring depth.
The entire measuring pad has to be on a flat and smooth surface for accurate readings
*Species Corrections for Ligno-Scanners and Ligno-VersaTec correlate directly to the Specific Gravity. Example: For a specific gravity of 0.57 (0.57g/cm 3 )set species # 57. Specific Gravity for most wood species can be found on the Internet. We also include a Species Chart with recommended settings.
The Ligno-Scanners SDM and the Ligno-VersaTec have calibrations built-in for drywall and concrete and a reference scale for non-wood building materials.
Measuring range: 5-60% dependent upon Species. For hardwoods the Scanners read lower than 5%, for softwoods the Scanners start reading above 5%. Resolution of read-out: 0.1% Less accurate above Fiber Saturation Point at 30%.
Wood temperature correction is not necessary.
1 9-V Battery for 3000 Readings, Battery included
Size: 1/2″H x 2″L x 5″W (for Scanner LD width is 2 7/8″) Weight: 8 ozs
Comes in a Carry Pouch with Belt Loop.
Product Documentation Links | |||
– User Instructions for Ligno-Scanner SDM – Wood Group Card for Ligno-Scanner SDM – Specifications and Features for Ligno-Scanner SDM |