Moist Cabinet for Curing Mortar and Concrete Test Specimens
Moisture Cabinet can be used for curing mortar and concrete test specimens. This humidity cabinet has an 11ft³ (311.5L) chamber capacity and a heated, triple-pane glass door to minimize condensation for observation of specimens.
The temperature range is from 32°–140°F (0°–60°C), settable in 0.2°F (0.1°C) increments. Heat output is 1750W (6,000BTUH) at 220V and 1600W (5,500BTUH) at 240V. Humidity controls are settable in 1.0% increments and maintain up to 95% humidity. Remote alarms and RS-232 interface for temperature and humidity allow continuous monitoring and data acquisition with the user’s PC.
Positive horizontal airflow ensures temperature uniformity to ±0.6°F at 77°–98.6°F (±0.3°C at 25°–37°C). Uniformity at 0–25°C and 37–60°C is ±0.5°C. Chamber temperature and humidity are shown on LED displays. Audible and visible alarms indicate temperature and humidity variations beyond setpoints.
Three stainless steel shelves with 50lb (23kg) stationary capacity, adjustable on 2in (50mm) centers, are included. Up to eleven shelves are accommodated in the 31x27x24in (78.7x68.6x60.9cm) 20-gauge stainless steel chamber. The exterior case is 18-gauge powder-coated steel. Please inquire about the additional standard or perforated stainless steel shelves.
Two 600 Watt wire-wound elements provide heat. Cooling is via a 1/4hp, non-CFC compressor. A steam generator provides chamber humidity. The user-supplied water source must be rated between 50K-ohm and 1meg-ohm resistance.
Features:
- A heated triple-pane glass door minimizes condensation
- 18-gauge powder-coated steel exterior case
- Remote alarms and RS-232 interface allow for continuous monitoring
- Data acquisition from the user’s PC
- Settable humidity controls
- LED displays
- Accommodates up to 11 shelves
Included Items:
- Moisture Cabinet (220V, 60Hz or 240V, 50Hz)
- Three 50lb (23kg) adjustable stainless steel shelves
Capacity 11ft³ (311.5L)
Humidity Range Maintain up to 95%, settable in 1.0% increments, Above ambient to 95% at 37°C (98.6°F)
Uniformity ±0.6°F at 77°–98.6°F (±0.3°C at 25°–37°C), and ±0.5°C at 0–25°C and 37–60°C
Temperature Range 0°–60°C
Temperature Accuracy ±0.1 at 25° to 37°C
Relative Humidity Accuracy Relative humidity control via steam generator from above ambient to 95% at 37°C
Humidity Accuracy ±5.0%
Humidity Resolution 0.01
Water Consumption 0.25gal/hr Input Water Volume
Display Digital dual LED
Power Requirements Heat is provided by two 600 Watt elements, cooling is via a 1/4hp, non-CFC compressor
Power Supply NEMA 14-20P Plug
Electrical 208-220V, 60Hz, 14 Amps, Single Phase
Inside Dimensions 31 x 27 x 24in (78.7 x 68.6 x 60.9cm) WxDxH
Product Dimensions 38 x 32 x 51.5in (96.5 x 81.3 x 130.8cm) WxDxH
Net Weight 575lb (261kg)
Meets Test Methods:
AASHTO M201
AASHTO T106
AASHTO T23
ASTM C 192
ASTM C 31
ASTM C
View the full line of Concrete Beam Molds and Beam Testers and our full line of concrete curing equipment and products for ASTM C192/192M Standards for Cement Tests. Our most popular model for curing is the Concrete Curing Box (165qt. Heat Only)
Need heat and AC for your concrete curing? We recommend the Concrete Curing Box (165qt. Heat/AC)
Accessories to Concrete Curing Box:
Concrete Transport Cylinder Racks store and protect multiple specimens during transport
Curing Tank Circulator improves tank circulation and the curing process.
