Power Bright 0AWG6, Power Cables for Inverter, 0 Gauge 6 Foot
These high amperage and ultra flexible battery cables are professionnal series made to be used with Power Inverters.
- 8 AWG Gauge Professional Series Battery Cables
- 24K Gold Plated Ring Type Connectors
- High Amperage
- Ultra Flexible
- OFHC Power Cable
- 105ºC High Temperature/Chemical Resistant
- Non-Gripping Jacket
An inverter connected to a battery will have a current draw associated with its operation and it is important that the cable supplying power to these is capable of carrying the normally expected current, plus a margin of safety. If it is not capable then it is likely to result in the cable becoming hot and potentially becoming dangerous. Although fuses are optionally used in the cable to protect the battery, the cable itself should be of an adequate rating to prevent this over-heating occurring under normal circumstances.
As a general rule, the smaller the diameter of the wire the higher the resistance and thus lower current capability over a given length. It is always OK to use a larger gauge cable.
When in doubt about the load, go up a gauge. The smaller the gauge number the thicker the cable, for example, 4 gauge cable is thinner than 1 gauge cable. Other factors can affect the capacity of wire besides the length, and this includes if it is in a hot environment, duration of load, type of load etc.
All cables have resistance, which means that there will be energy loss in the form of voltage drop experienced along the length of the cable.In low voltage systems cable length can have a significant impact on voltage drop. Even a cable run of 10 feet for small appliances can produce significant voltage drops and this problem is demonstrated well on some vehicles where the headlights are not as bright as they could be. If you check the voltage at the bulb connectors you might find that the bulbs are not receiving a full 12 Volts from the battery due to the wire size being too small for the cable run length.
Some owners opt to maximize their inverters ability by using cable with a larger gauge over a shorter distance which allows the circuit to provide the fullest supply of voltage and amperage to the inverter.
These cables are not just for inverters, they can be used for most automotive electrical applications.
The Power Bright 0AWG6 Power Cables for Inverter are designed to meet the high amperage demands of power inverters. These professional series cables are constructed with 8 AWG gauge and feature 24K gold plated ring type connectors for maximum conductivity.
With their high amperage capability, these cables are capable of carrying the recommended current draw for power inverters, ensuring safe and efficient operation. The ultra-flexible design allows for easy installation and maneuverability, making it ideal for use in tight spaces or installations that require flexibility.
Made with OFHC power cable, these cables offer exceptional performance and durability. The 105ºC high temperature and chemical resistant capabilities ensure that the cables can withstand harsh environments and prolonged use without any degradation in performance.
To further enhance safety, the Power Bright 0AWG6 Power Cables feature a non-gripping jacket. This prevents the cables from accidentally coming into contact with other conductive materials, reducing the risk of short circuits and electrical hazards.
It is important to choose the right gauge cable for your power inverter to prevent overheating and potential hazards. These cables are available in 0 gauge, which is suitable for high amperage applications. Remember, it is always better to opt for a larger gauge cable to ensure sufficient power supply and prevent voltage drops.
Not only are these cables perfect for power inverters, but they can also be used for various automotive electrical applications. Their versatility makes them a must-have for any vehicle owner or installer seeking high-quality and reliable power cables.
Upgrade your power supply with the Power Bright 0AWG6 Power Cables for Inverter. Experience the convenience and reliability of these professional series cables, designed to meet the demands of high amperage applications. Ensure safe and efficient operation of your power inverters with these ultra-flexible and durable power cables.