Proceq Profometer Corrosion Meter
The Profometer Corrosion Meter uses half-cell electrical measurement technology for detection and mapping of steel reinforcing corrosion in reinforced concrete. A cable is connected to the rebar grid and electrical potential is measured through fluid-saturated copper/copper-sulfate electrode probes. Data is collected in the rugged touchscreen controller and processed for mapping and reporting with the included Profometer Link software. Extent of active corrosion activity is easily measured and documented, and corrosion hot-spots are quickly isolated.
This advanced instrument features a 7in (178mm) 800x480 pixel color touchscreen display with an intuitive user interface, illustrative display and assisted workflow. The dual-core processor and 8GB flash memory allow efficient post processing of measured data and storage for later download to user’s PC. Customizable screen graphics and a pre-defined, ASTM compliant layout enable fast, on-site data interpretation. Measurement range is from -1000 to +1000mV with 1mV resolution. Sampling rate is 900Hz and impedance is 100MΩ. The Profometer Corrosion Meter can also be configured to use third-party silver/silver chloride electrodes.
The Profometer Corrosion Meter is equipped with the touchscreen and interface box, and also comes with a charger, 82ft (25M) cable with clamp, USB cable, software, carrying case and strap. The unit requires a Rod or Wheel Corrosion Electrode, purchased separately, for operation. The Rod Corrosion Electrode is used for single readings or on a manually-defined grid pattern. Available Single-Wheel and Four-Wheel Electrodes improve data collection accuracy and maximize productivity for assessing large areas. Both wheeled electrodes include a 5.6ft (1.7M) telescopic handle, encoder, and required cables.
The Corrosion Meter is designed to be an all-in-one instrument, and shares hardware and electronics with the Profometer® 6 series of Cover Meters.
Features:
- All-in-one instrument for detecting and mapping corrosion
- 7in color touchscreen with intuitive user interface
- Dual Core Processor
- 900Hz sampling rate
- Quick data interpretation on-site
- Voltage input range allows for use of copper or silver chloride electrodes
Included Items:
- Profometer Corrosion Meter w/ Touchscreen
- Software
- Charger
- 82ft Cable w/Clamp for connection to reinforcing grid
- USB Cable
- Carrying Case and Strap
Product Dimensions 9.8 x 6.4 x 2.4in (250x162x62mm) WxDxH
Accessories:
- Rod Corrosion Electrode required for use in identifying active corrosion
- Single-Wheel Corrosion Electrode offers higher accuracy than standard Rod Corrosion Electrode in determining where active corrosion begins
- Four-Wheel Corrosion Electrode is speedy and accurate, designed to continuously measure electrical potential when detecting hot spots
- Conversion Kit to Cover Meter with universal probe easily converts CT-170 to a CT-160 Profometer Cover Meter
Meets Test Methods:
ASTM C 876
BS 1881
View the full line of of Corrosion Testing for Concrete and Concrete Testing
