Proceq Conversion Kit to Profometer Corrosion Meter
The Conversion Kit to Profometer® Corrosion Meter quickly converts a Profometer® 6 Cover Meter to the CT-170 Profometer® Corrosion Meter for detecting and mapping corrosion in reinforced concrete.
The Activation Key unlocks the software of a Cover Meter to enable the features of the Corrosion Meter. A Rod, Single, or Four-Wheel Electrode is required for use with the Corrosion Meter, including converted units, and each is sold separately.
Features:
- Activation Key easily converts Profometer® 6 Cover Meters to Corrosion Meter
- Upgrade operation is completed in minutes
Included Items:
- Upgrade Kit (CT-163 to CT-165)
Profometer® 6 Cover Meters by Proceq are the sixth generation in over 40 years of quality instruments designed for determining location and measurement of concrete reinforcing steel. These models offer greater flexibility, productivity and advanced technology than ever, with high-resolution color touchscreen operation, internal 8GB flash memory, dual-core processors and instant model upgrades through purchase of an activation key.
Profometer models have superior detection range and accuracy. Bar location can be detected and concrete cover measured up to 7.3in (185mm) deep, with cover accuracy of less than ±0.16in (4mm). Shallower depths can produce diameter accuracy of ±1mm. Diameters of #12 (40mm) bars can be identified at depths up to 2.5in (63mm) with accuracy of ±1mm. Detection and measurement limits and accuracy are affected by cover depth and bar diameter. 7in (178mm) IP54 rated color touchscreen display is 800x480 pixels.
There are three models, and each features a color touchscreen contained within a rugged housing to protect against harsh field conditions. They also come with a universal probe with integrated spot probe and detachable wheeled scanning cart, a 5ft (1.5m) probe cable, power supply, carrying strap and carrying case. ProfometerLink software is also included and allows downloading of data and creation of customized reports with detailed charts and graphs. Optional CTA-85 Telescopic Extension Rod w/ Cable makes data collection on floors or overhead areas more efficient and less tiring. All Profometer® 6 units share the same hardware and basic electronics, differing only in available software features. Upgrade Kits are available separately, and consist of activation keys to unlock features converting the CT-160 to CT-163, and the CT-163 to CT-165. Each model can also be converted directly to the CT-170 Profometer® Corrosion Meter (available separately) with purchase of the CTA-91 Conversion Kit and desired Corrosion Electrode (Rod, Single, or Four-Wheel). The meter’s 3.6V internal battery is rated for up to 8-hour use in standard mode.
Accessories:
- Rod Corrosion Electrode required for use in identifying active corrosion
- Single-Wheel Corrosion Electrode offers higher accuracy than standard Rod Corrosion Electrode in determining where active corrosion begins
- Four-Wheel Corrosion Electrode is speedy and accurate, designed to continuously measure electrical potential when detecting hot spots
- Conversion Kit to Cover Meter with universal probe easily converts CT-170 to a CT-160 Profometer Cover Meter
Meets Test Methods:
ASTM C 876
BS 1881
View the full line of of Corrosion Testing for Concrete and Concrete Testing