The RH BluePeg Probe is used for in-situ concrete relative humidity testing with the Tec RH or DuoTec Meters. They are available as an individual product and also as an included component of the Concrete Humidity Measurement Kits. Precision RH Probes have 3.5mm connectors and fit Plastic Hole Liner Sleeves and placed in the borehole. When connected to kit meters, Probes have relative humidity accuracy of±2% for 10-90%, and ±3% for 0-10% or greater than 90%. Temperature accuracy is ±0.5° for 32° to 120°F, plus ±1° from 5° to 32°F and from 120°F to 160°F. Available as single units or in packages of 3, 5, or 10. Additional probes minimize acclimatization time when multiple readings are required over large areas, and probes can be left inside Sleeves between readings for higher efficiency. Probes are easily recovered after testing and are reusable.
- Recoverable and reusable
- Offer good temperature and humidity accuracy
- Available as single unit or in packages of 3, 5 or 10
|Relative Humidity Accuracy||±2% for 10-90%, and ±3% for 0-10% or greater than 90%|
|Temperature Accuracy||±0.5° for 32° to 120°F, plus ±1° from 5° to 32°F and from 120°F to 160°F|