Thermolyne F6020C Large Muffle Furnace, Max. Temp. 2192F, 14L, 4400W
The Thermolyne Muffle Furnace is used for ashing, ignition tests, gravimetric analyses, and volatile matter determinations. For construction materials, furnaces are used for tests of soils, aggregates, and cement. This unit has rugged components and top quality materials to assure longest service life. The max. temp range for this furnace is 2192F (1200C) and has a chamber capacity is 864in3.
The programmable controller operates like single set-point controllers, except it can be programmed to ramp up or down as well as to dwell for constant temperature periods. This model also features an over-temperature protection. It also has a 2-ramp/2-dwell program capability and a 0.3in (7.6mm) LED digital display in either °C or °F.
Muffle Furnace has a 0.5ft³ (14.2L) capacity and temperature range of 212–2,192°F (100–1,200°C).
This premium large muffle box furnace has a built-in vent port to remove unwanted moisture and contaminants while extending the service life of the heating element and furnace. The unit has thermocouple break protection to cut power to heating elements and prevent thermocouple failure runaway.
Its spacious chamber offers four heating elements on the top, bottom, and each side for enhanced uniformity of temperature. The chamber rear is equipped with a 0.31in (7.8mm) diameter port for monitoring temperature. When the door is opened, a safety switch stops power to the heating elements.
The temperature stability is ±0.3 at 1,000°C, and temperature uniformity is ±2.2 at 1,000°C. Its controller is a digital single setpoint showing actual temperature and setpoint.
Also has multiple elements in sides, tops, and/or bottoms. Since doors and backs have no elements, only the center two-thirds of the chamber is considered uniform in temperature, and chamber size should be selected accordingly. This unit has a ceramic fiber insulation for faster heat-up and reduction of energy consumption. It is also equipped with safety interlock door switches. Power to the elements is automatically cut off when the door is opened. Supplied with a cord and plug.
Accessories:
- Crucible Tongs to safely remove beakers and other labware from the furnace
- Porcelain Crucibles used for loss-on-ignition testing of cement, fly ash, and soils and are available in 10, 30, or 45mL
- Heat Resistant Gloves provide additional operator protection from high temperatures when placing or removing items inside the furnace
Thermo Scientific Furnaces [EU]
Specifications:
Capacity (English) 0.5 cu.ft.
Certifications/Compliance CSA approved
Description F6020C
Capacity (Metric) 14 L
Temperature (Metric) 100C to 1200C
Type Single Setpoint with Ramp and Programmable
Power Consumption 4400 w
Amps 18.3
Temperature Stability 0.3 at 1000C (2.2 at 1000C)
Dimensions (D x W x H) Interior 10 x 12.8 x 6.8 in. (25 x 33 x 18 cm)
Dimensions (L x W x H) Exterior 20.1 x 19.1 x 21in. (51 x 48.5 x 53.3 cm)
Electrical Requirements 240 50/60 Hz
Voltage 240 V
Frequency 50/60 Hz
View the full line of Industrial Furnace Ovens such as Thermolyne Furnaces and Carbolite Furnaces