3in Unbonded Capping Neoprene Pad Cap, 50 Durometer
Sold individually. Two are required for compression testing of concrete cylinders. Choose 20 for one box.
3in (76.2mm) Neoprene Pads are available in 50, 60, or 70 durometers and used in compressive strength testing of 3in concrete cylinders. They are 0.5in (12.7mm) thick and meet durometer requirements of ASTM C1231 and AASHTO T 22. The 3in pads flow during compression to fill irregularities in cylinder ends and ensure load uniformity. The 3in Steel Retainer Set is sold separately and required to hold one pad at each end of the concrete cylinder. Two pads are required and each pad can be used for up to 100 tests.
The 3in, 50 Durometer Pads work well in testing concrete strengths from 1,500-6,000psi (10-40mPa).
Compression pads are available in several hardnesses.
- 50 duro for design strength 1500 to 6000 psi
- 60 duro for design strength 2500 to 7000 psi
- 70 duro for design strength 4000 to 12000 psi
Per ASTM C1231, the pad can be reused up to a maximum of 100 times.
Meets Test Methods:
AASHTO T22
ASTM C 1231
View the full line of Concrete Capping and Unbonded Cylinder Capping
Related Blogs for Unbonded Cylinder Capping:
Essential Steps for Capping Concrete: A Hassle-Free Guide
Benefits of Capping Compound for Concrete Cylinder Testing
Unbonded Caps for Concrete Cylinders: Low-Strength Breaks
The 3in Unbonded Capping Neoprene Pad Cap, 50 Durometer is a must-have for compression testing of concrete cylinders. Sold individually, two of these pad caps are required for proper testing. Each cap is 3 inches (76.2mm) in size and is available in a 50, 60, or 70 durometer. The 50 durometer is recommended for testing concrete strengths ranging from 1,500 to 6,000psi (10-40mPa).
These neoprene pads are 0.5 inches (12.7mm) thick and meet the durometer requirements of ASTM C1231 and AASHTO T 22. During compression, the pads flow to fill any irregularities in the cylinder ends, ensuring load uniformity and accurate test results. These pads are designed for quick and easy use, making the compression testing process hassle-free.
To hold the pad in place at each end of the concrete cylinder, a 3in Steel Retainer Set is required (sold separately). Each pad can be used for up to 100 tests, making them cost-effective and durable. It is important to note that according to ASTM C1231, the pad can be reused up to a maximum of 100 times.
Along with this product, we offer a full line of Concrete Capping and Unbonded Cylinder Capping options. These products are designed to make capping concrete cylinders easier and ensure accurate results. You can find more information on these products and related blogs on our website.
If you are looking for a reliable and efficient solution for compression testing of concrete, the 3in Unbonded Capping Neoprene Pad Cap, 50 Durometer is the perfect choice. It meets all the necessary standards for testing and guarantees accurate and consistent results. Choose quality and performance by selecting this pad cap for your compression testing needs.
