TR-70410 F.A.P. Plus™ 4" High Viscosity Rod Skimmer (30" travel) | DGSI Slope Indicator Environmental Products
This skimmer is used when the product has a viscosity higher than 80 SSU, such as oils.
The 4 in high viscosity skimmer uses the same design as the TR-517, less the hydrophobic and bypass elements. The skimmer has a 30 in travel and a specific gravity of 0.95, allowing it to float at the water/ product interface. The product collects on the top of the skimmer inlet and, from there, is pumped to the surface. In normal applications the skimmer will remove product down to a ¼ in to ½ in product layer. The skimmer can be adjusted in the field to remove the product even further and attain a thinner layer.
- The skimmer is attached to the bottom of the F.A.P. Plus™ pump and is used to separate the product from the water in the well.
- The skimmer is a necessary part of the F.A.P. Plus and F.A.P. Plus ZW pumps and must be ordered separately.
- Depending on your site conditions, three types of skimmers are available: standard, high-viscosity, and density.
Note: Density skimmers are not compatible with the F.A.P. Plus ZW. To use a density skimmer, you can either purchase a conversion kit (TR-51699) or you can purchase the F.A.P. Plus pump (TR-516).
F.A.P. Plus™ Pump System
The F.A.P. Plus™ Pump system is comprised of seven main components:
- F.A.P. Plus™ Pump (1*)
- Skimmer Assembly (2*)
- Well Clincher (3*)
- Filter/Regulator (5*)
- Pneumatic Overfill Protection Device (4*)
- Electric Air Compressor (not shown*)
- Hoses (not shown*)
* refer to product photo for reference
Options:
- Solar NAPL Compressor
- F.A.P. HF
TR-70410 F.A.P. Plus ZW™ High Viscosity Skimmer Specifications
- Weight: 8 lb
- Dimensions: 1 ¾ in-OD x 67 in long
- Materials: UHMW polyethylene, stainless steel, urethane tubing, brass fittings and PVC
- Float: UHMW polyethylene, S.G. 0.95
- Travel: 30 in