Gilson’s new 1-Touch Vibratory Shaker for 8in and 200mm sieves combines the latest in electronic control with proven separation technology for fast, accurate separations of materials 2mm and finer. The touch-screen programmable controller allows selection of vibration level, time, and pauses. Once operating parameters are set, just tap “Start” on the display screen to begin each new test. Up to 99 testing profiles can be stored in non-volatile memory to insure exact repeatability. Quiet, compact bench-top unit offers complete control of multi-directional agitation for optimum performance based on material type.
The wide range of user-controlled performance options means the 1-Touch Vibratory Sieve Shaker is suitable for a variety of materials. Pharmaceuticals, powders and many other granular materials are efficiently sized on this shaker. The three-dimensional sieving action evenly distributes the specimen across sieve surfaces and continuously reorients particles to insure the maximum number of passing opportunities. Optimal size range is dependant on material type, but typically, particles between No.10 and No.635 sieve sizes are easily processed. The 5.6in (142.2mm) diagonally measured screen offers a bright, clear view of controls and operating information. Fast acting stack clamps adjust quickly, hold their position, and tighten with little effort. Sieves are securely locked down, assuring efficient transfer of vibration energy during operation.
The shaker accepts eight full-height, or sixteen half-height 8in (203mm) diameter sieves plus pan. 200mm sieves can also be used. Times can be set up to 99 minutes, 99 seconds. Ten levels of vibration power are selectable for optimum separation efficiency with different materials. Intervals (pauses) of up to 99 minutes, 99 seconds can be programmed into the testing profile.
The sturdy housing is powder coated steel and has adjustable leveling feet with non-skid rubber pads. Electrical requirements are 115V/60Hz.
