Gilson CF-1 Continuous-Flow Screen
Gilson's Continuous-Flow Screen is extremely versatile, ideal for the laboratory where many different separation jobs are encountered. For small-scale scalping, mass separation and continuous-feed production applications with coarse sized materials, the Continuous-Flow Screen does the job practically and efficiently.
The unit can be used with one or two screen trays with screening area approximately 16x24in (406x610mm) per tray. The trays are vibrated in inclined position, with incline angle adjustable in a range of 4°—10°, and speed is digitally controlled up to 650 cycles per minute. Inclined Screen Trays are available with wire cloth in sizes 4in to No.100, or may be specified with round openings, slotted openings, or other special wire cloth.
Discharge pans are provided in two styles, for either front or bottom discharge. The trays and pan are secured by clamp rods readily accessible on top of the unit. The Continuous-Flow Screen is powered by a 1/3hp, fan cooled, totally enclosed motor.
The vertical-throw action of the Continuous-Flow Screen is designed primarily for coarse materials (2in to No.4), but adjustable incline and frequency allow use with a wide range of materials. A special low amplitude drive shaft may also be specified to improve separations in sizes finer than No.4.
Screen Dimensions: 34x22x28in (864x559x711mm), LxWxH. Length is 41in (1041mm) with trays installed.
Electric: 110V/60Hz
The Gilson CF-1 Continuous-Flow Screen is the ultimate tool for any laboratory dealing with a variety of separation tasks. This versatile device is perfect for small-scale scalping, mass separation, and continuous-feed production applications that involve coarse sized materials. With the CF-1 Continuous-Flow Screen, you can efficiently and practically complete any separation job.
This unit is designed to be used with one or two screen trays, each with a screening area of approximately 16x24 inches (406x610 mm). The trays are vibrated in an inclined position, and the incline angle can be adjusted within a range of 4°–10°. The speed of the trays is digitally controlled and can reach up to 650 cycles per minute. You have the option of using wire cloth in various sizes from 4 inches to No.100, or you can opt for round openings, slotted openings, or other special wire cloth.
The CF-1 Continuous-Flow Screen provides two styles of discharge pans for either front or bottom discharge. The trays and pan are securely held in place by clamp rods that are easily accessible from the top of the unit. Powering this device is a 1/3 hp, fan-cooled, totally enclosed motor that ensures efficient operation.
The vertical-throw action of the Continuous-Flow Screen is primarily designed for coarse materials ranging from 2 inches to No.4. However, thanks to the adjustable incline and frequency settings, it can be used with a wide range of materials. For separations in sizes finer than No.4, you have the option to specify a special low amplitude drive shaft.
With dimensions of 34x22x28 inches (864x559x711 mm), the CF-1 Continuous-Flow Screen is compact and easy to maneuver. The length increases to 41 inches (1041 mm) when trays are installed. It operates on 110V/60Hz electricity.
Experience the convenience and efficiency of the Gilson CF-1 Continuous-Flow Screen in your laboratory. With its versatile capabilities, adjustable settings, and high-quality construction, this screen is the perfect solution for all your separation needs. Get your CF-1 Continuous-Flow Screen today and streamline your laboratory operations.