M.C. Miller 12435 iBTVM Wireless Voltmeter with Pipeline Survey Android App
All new M.C.Miller meters include a Calibration Certificate
Our iBTVM Wireless Voltmeter offers the ideal solution for field data collection in a small form factor, wireless data-logger communication, long-lasting rechargeable battery, and internal sub-meter GPS antenna while weighing less than a pound.
This Pipeline Survey version iBTVM model includes our Pipeline Survey application for Android™.
Pipeline Survey data collected can be imported into our ProActive corrosion control management software, or exported to a .xls format using our free Android™ ESD program.
Features:
- Comes with license for M.C.Miller's Pipeline Survey (Item #SFT315) Android™ application
- iBTVM Lite Application for Android™ is also included
- Android™ compatible wireless Voltmeter
- Wireless communication with tablets & phones
- Integrates with ProActive, or export to .xls
- Rechargeable battery lasts 18 hours with continuous usage
- Submeter GPS at no additional cost
- Wireless status indicating LED on case exterior
- 5 pin connector and 2 shrouded banana jacks
- iBTVM wireless Voltmeter
- Pipeline Survey application license
- iBTVM Lite software application
- Carrying case with padding
- Wall plug charger adapter
- USB charging cable
- (2) Sheathed Banana Plug Test Leads with 27-C Clip and sleeve (Black & Red)
Please Note: M.C.Miller Data-Loggers and meters are to be used with M.C.Miller approved software only.
An Android device is required to collect data from the unit. Download the licensed application found on the Downloads tab with your Android device and connect to the unit via Wireless.
Specifications
Voltmeter Characteristics:
- High Voltage Isolation for Operator Safety : Tested to 1kV steady-state/15kV transient voltage levels (designed for higher voltage level isolation) – operator isolated from power supply
- Non-Saturating : Voltmeter will not saturate on 5.7VDC and higher ranges with superimposed AC signals up to 120VAC (for readings up to approximately 50% of full scale at 60Hz) and/or inductive spikes up to 2kV appearing at the input terminals
- Extensive Ranges : Various DC Ranges (40mV full scale to 570V full scale) plus 40V and 400V AC Ranges. All DC Ranges have <80ms response times for accurate On/Off pair readings during fast current interruption cycling (for example, 700ms ON / 300ms OFF).
- Lithium-Polymer rechargeable battery
- Interior battery charging port
- Re-chargeable battery lasts 18 hours with continuous usage
- Battery module easily replaced in the field
- Android™ compatible
- Wireless status indicating LED on case exterior
- 5-pin connector for optional push-button data-probe triggering of readings
- Two shrouded banana jacks (one red/one black) – 1,000V; CAT III (IEC 61010 rating)
- Internal GPS antenna
- IP65 Rated
- Operating Range: 32°F to 104°F (0°C to 40°C)
- Battery Charging Range: 32°F to 104°F (0°C to 40°C)
- Length: 5.875 inches (14.92 cm)
- Width: 3.5 inches (8.89 cm)
- Height: 1.75 inches (4.45 cm)
- 0.82lb (0.37 kg)
*Android is a Trademark of Google, Inc.
Documents
Brochures:
Downloads
Compatibility: Android version 4.4.4 (KitKat)
Simply tap on one of the links below using your tablet. Then, select Install and Allow if prompted to do so.
iBTVM with Pipeline Survey:
Pipeline Survey application, ver 1.2.3.0- iBTVM Lite application, ver 1.4.1.0
Available for purchase:
- Test Site Survey application, ver 1.4.0.1 (requires license)
PC Additional:
- Android ESD - Excel Survey Download Software - Download pipeline survey data off your iBTVM datalogger and export it to a .xls file format for use with spreadsheet applications.
- Android Driver for ProActive - For adding ProActive Android™ support (if absent).